Messtechnik SITA science line t60, Руководство пользователя

Страница: 7 / 30

7
SITA Messtechnik GmbH
5 Setting up the Device
Prior to measuring, the device needs to be set-up. Screw the rod into the
base-plate and stand it on a stable surface. Slide the sensor head onto the
rod while pushing the lever down. Release the lever once the desired
position is reached. Now, conn
ect the sensor head’s pneumatic cable to the
measuring device. Note that the red markings on both the plug and the
socket need to be aligned. Activate the power supply by plugging it into
mains or insert 4 mignon (AA) batteries into the battery compartment (watch
for the right polarisation!) . Additionally, you may want to connect the
device to the serial port of your PC. This can be done by means of the
interface cable included. Plug the capillary onto the Luer connector on the
sensor head (slightly push and then turn right). The tensiometer is now ready
for measuring.
6 Inserting or Changing the Battery
For inserting and changing the batteries (4 x Mignon (AA)) open the bottom
of the device by depressing the ends of the battery box. Please take care for
the correct polarisation.
Warning
Use this device for the described
application only!
Other uses might be dangerous.
