Messtechnik SITA science line t60, Руководство пользователя

Страница: 18 / 30

18
SITA Messtechnik GmbH
12.3 Auto-Measurement
The auto-mode is useful for analysing the dynamic behaviour of surface
tension. Switch on the device, calibrate and lower sensor head until the grey
marking on the temperature sensor is level with the surface of the liquid to be
measured. The calibration is explained in Calibration . Press the auto key
twice to start the auto-measurement. In order to start a measurement you
need to press the online key two times. (The first punch takes you to the
measuring and display options menu. Here, you may check or change the
parameters of the measurement to be started).
You can start the auto measurement from the menu, too. Press the
menu
key and select auto measure using the cursor keys . Select the auto
measurement by pressing the ENTER key. The device automatically displays
the menu for setting the measuring parameters and display options. The
measurement starts as soon as the software key "start" is hit. In case the
menu item " auto-measurement " was selected and an auto measurement is
already running the set-up menu will not be displayed and the right software
key will show "stop". Pressing the left software key "set" takes you to the set-
up menu. In order to continue the measurement you need to press the
middle software key "go on".