manualshive.com logo in svg

Messoa POE008, Руководство пользователя

Поделиться
Скачать
Messoa POE008 Скачать руководство пользователя страница 49

12.13 

Miscellaneous 

Miscellaneous setting is used to configure output queue aging time, VLAN 
stride and IGMP snooping. 

 

 

Figure 11-1 

 

Output Queue Aging Time: 

 

 

Purpose

: This function is used to avoid the traffic jam on one port will 

not cause the congestion of other ports. In some application, for 
example the IPTV Multicast communication, the multicast stream is 
continuously generating from the source port, the client port may be 
congested because of the limited bandwidth or slow network 
processing ability. Then, the Pause frame of Flow Control will be 
generated once the packet buffer is full. With the Output Queue Aging 
Time feature, when a packet is stored at output queue in a switch for a 
long time will be aged out and become a useless packet. 

 

Aging Time: 

This command allows user to disable the feature or configure 

the aging timeout time to 200ms, 400ms, 600ms or 800ms.

 

 

 

45

Содержание POE008























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды