Speed:
When the Auto-Negotiation column is set as Disable, users
have to set the connection speed to the ports ticked.
Duplex:
When the Auto-Negotiation column is set as Disable, users
have to set the connection mode in Half/Full to the ports ticked.
Pause:
Flow Control for connection at speed of 10/100Mbps in
Full-duplex mode.
Backpressure:
Flow Control for connection at speed of 10/100Mbps
in Half-duplex mode.
Addr. Learning:
When the Auto-Negotiation column is set as Disable,
users have to set this column as Enable or Disable.
Select Port No.:
Select the port/ports you want to apply to. You can select
one or multiple ports here.
Click
Update
to have the configuration take effect.
Current Status:
Displays the status of each ports.
This field indicates the port
6 is link up and run as 100M Full, Flow Control Enabled.
Setting Status:
Displays the configuration of each ports.
19
