12.13.3
Load Default Setting
Clicking the
Load
button will make the switch being set to the original
configuration.
Figure 2-4
※
Note: It exclude to change user name, password and IP configuration. If
you want to restore default setting including IP and user name password,
then you can press the reset button for hardware base reset.
More detail information about Load Default Setting – Hardware Base is
activated by click Load Default Button. The procedure is described as
following.
The purpose of this button is to provide a method for the network
administrator to restore all configurations to the default value.
To activate this function, the user should follow the following procedures.
(1) Press the “Load default” button for 3 seconds until you see all the LED
blinking.
(2) When LED starts blinking, it means the CPU is executing the “load
default” procedure. You can release the button now.
After completing this procedure, all the factory default value will be restored.
It includes the IP address, the user name, the password and all switch
configurations.
Please noticed that the rest of the switch settings will be erased after this
procedure.
15
