Figure 4-2
VLAN Mode :
Displays VLAN mode : port based/Tag based VLAN. Here
you can also switch back to Port Based VLAN Mode
Tag Mode:
AddTag
means the outgoing packet of the selected port will be
inserted a 802.1Q tag. Use this setting for your Up- and Downlink
Ports in your VLAN Tagged Network.
don’t care:
Don’t care means the outgoing packet of the selected port
keep the original packet received at the source port. This is the default
setting when starting VLAN configuration. You should change to either
Add or Remove Tag.
Remove Tag:
Remove tag means the 802.1Q tag of the outgoing
packet of the selected port will not be sent. Use this setting for your
Network Connections to PCs. Only packets of the VLAN Group the
Port is member of will be sent.
12.13.3
VLAN Member
The ports need to be made member of your VLAN groups. This is for Tag
Based and Port Based VLAN Mode. The screen here looks different whether
you run Tag Based or Port Based Mode.
VLAN Member in Port Based Mode
25
