VID Source Port :
This table allows you to configure PVID of the port. Select the port number
while you add VLAN and select VLAN member ports, the selected ports’
PVID will be the VID you typed.
Please noted that one port only can have one PVID. While one port joins
multiple VLAN groups, the PVID is important to identify where the incoming
traffic will be forwarded to.
For example:
Port 3 is the member of VLAN 100 and 200, PVID of it is 100.
The traffic received from the connected PC is usually untagged, the
incoming packets will then be tagged with PVID within the switch and then
follow the VID table to forward traffic.
Port VID Map :
This table shows the PVID of the ports.
VLAN Member Table :
This table shows the VID and its member ports.
Configuration Steps:
First, add your VLAN Groups (identified throughout your network by unique
and constant numbers). Start with IDs from 100 and up is often. Starting with
100 gives you enough free room and less compatibility issues.
Second, enter “100” in the field right of VID Setting, then select or deselect
which ports are member of that group. Your up- and downlink ports need to
be the member of every existing group. If the port joins different VLAN groups,
28
