MesaPhotonics VideoFROG FROGscan, Руководство пользователя

Страница: 51 / 71

Chapter 6. Installing and Changing Hardware
09/07/2018 Vs 003 FROGSCAN USER’S MANUAL Page 45
Install the new Crystal
5. Carefully, slide the Crystal Cartridge into the Crystal Mount, taking note of the location of the
microSD Card with respect to the SD Card slot.
6. Ensure that the microSD Card has fully engaged into the SD Card slot by gently pushing on the top
of the Crystal Cartridge.
7. Reinstall the top bar to secure the Crystal Cartridge in place, taking note of the Cone Point Screw
location and the mating surface on the Crystal Cartridge.
8. Tighten the 2-56 Socket Head Cap Screws to secure the top bar to the Crystal Mount.
9. In VideoFROGscan, click on the Change Crystal switch to turn off the green indicator light.
10. If the FROGscan was supplied with the Optional Software-controlled Crystal Tilting, the Crystal
Mount will perform a homing procedure. At the end of the homing process, the crystal will be
returned to the previous tilt angle.
11. If the FROGscan has a manual tilt mechanism, see Section 5.1 to unlock the crystal and set the tilt
angle before proceeding.