Mesa Labs Smart-Well Model 1710 Operation Manual - 9153 Rev E
9
5.
With scissors, cut the end of the paper at an angle towards the roll from right to left (see Figure
2).
Figure 2. End of paper with proper tail for feeding
6.
Insert the end of the paper into the slot at the rear of the printing mechanism (see Figure 3) and
press the
LF
button until approximately 5 or 6 cm of paper feeds through the mechanism.
7.
Pull the black paper holder outward and insert the paper roll (see Figure 3)
Figure 3. Loading the paper roll
8.
Pass the end of the paper through the slot on the printer cover, and mount the cover.
9.
To remove the paper roll, remove the printer cover, pull the black paper holder outward, lift the
roll, and slowly pull the end of the paper out of the printing mechanism.
PREPARING TO PRINT
1.
Ensure that the printer is plugged in, the ribbon cassette and paper are loaded, and the power
switch is in the
ON
position.
