Mesa Labs Smart-Well Model 1710 Operation Manual - 9153 Rev E
20
The Wizard will store and display the 10 most recent entries. The most recently used entry
will be selected by default.
The Wizard lists are sorted as follows: the most recently used entry will be listed first, and
the rest of the entries will be sorted.
The Wizard entries all must be 8 characters or less.
The
BI Insert Wizard
contains four screens (two screens for positive control cavity
C
) to prompt for:
1.
BI Lot #
- the lot number of the BI in the format SR-XXX where XXX is a three or four digit
number. The lot number can be found on the unit label of the BI.
Select the lot number from the list using the
Up
and
Down Arrow
keys. If the BI lot number
does not appear in the list, press the
+
button and enter the correct lot number using the
keypad that will appear. To remove an item from the list, select it and press the
―
button.
When the correct lot number is selected, press the
Right Arrow
button to continue.
2.
User
- the user identifier or initials of the incubator operator.
Note: user identifiers are provided for reporting
convenience and are not intended as a control or as
electronic signatures.
Select your user ID from the list using the
Up
and
Down Arrow
buttons. If your user ID is not in
the list, press the
+
button and enter your user ID using the keypad that will appear. To remove
an item from the list, select it and press the
―
button.
When your user ID is selected, press the
Right Arrow
button to continue. To return to the
BI
Lot Number
screen, press the
Left Arrow
button.
3.
Ster #
- the identifier of the sterilizer in which the BI was exposed. The
Ster #
will not be
prompted for a positive control BI.
Select the sterilizer number from the list using the
Up
and
Down Arrow
buttons. If the sterilizer
number is not in the list, press the
+
button and enter the sterilizer number using the keypad
that will appear. To remove an item from the list, select it and press the
―
button.
