Merging Anubis Premium, Руководство пользователя

Страница: 39 / 138

39
Peaks: The top Red led of the Preamp metering will indicate that a Peak has
occurred. In order to clear the Peak display, simply tap on the meters VU to clear
the Peak.
Output: The Output meters located on the far right of the UI display the Output
level and metering of the selected Monitor whether it is a local Monitor (Main, Line,
Headphones 1, Headphones 2) or an over the network Monitor set.
The name of the selected Output is displayed at the top of the meters.
Note: Despite the display being two channels, the peak of all channels, split in left and
right channels is indicated.
Inputs 3-4 Instruments/Line:
Swipe from Right to Left on the TFT screen to access the Anubis Inputs 3-4
The location indicator will show second Preamps page.
The Instruments (Hi-Z)/Line inputs 3-4 are the ones located on the front panel of the ANUBIS on
1/4" connectors (6.3 mm). This second Preamps page will give you control over those Preamps.
The Preamps controls for those inputs 3-4 are similar to inputs 1-2 but will apply to Hi-Z,
Instruments or Line inputs types only. Thus, the 48V Phantom power and Pad/Boost options are
not available for the Anubis inputs 3-4.
Note: Input 4 is shared with the Built-in Talkback. Connecting an Instrument or Line input jack into this
input will deactivate the built-in Talkback (Channel 5).
It is recommended when you pull out a Jack out of the input 4 to either Mute your Monitors or Cut the
Input 4 preamp signal prior to pulling out the Jack to avoid an accidental short feedback situation
between the built-in talkback Mic and the Monitor set.