Merging Anubis Premium, Руководство пользователя

Страница: 109 / 138

109
Procedure:
1. Your DAW playback and Monitoring should already be setup and wired, as detailed in the
previous monitoring use case.
2. In order to monitor your Microphones and Instrument input, the operator can use the already
available default sources.
The Anubis default factory settings come with a MIC/Line 1-2 Source and Inst/Line 3 Source. If
those sources are not available or if you wish to use different sources, please refer to the
Settings>Sources manual section.
Anubis factory default Sources patching
Default patching under the respective Sources and Monitors settings
Settings>Sources Mic/Line 1-2 Patch Settings>Sources Inst/Line 3 Patch
Note: Connecting only one input to a Stereo Source will hard pan this source monitoring to either the
left or right channel depending of the input used. It is recommended to change the source type to
Mono if you are using only one input in order to have this source monitored to the center.
3. Launch your DAW making sure it is loading Merging’s Driver (or MassCore For Pyramix users)
and then open ANEMAN (refer to the separate ANEMAN User Manual for operation details).