Merging Anubis Premium, Руководство пользователя

Страница: 38 / 138

38
Link: Tap to link a pair of input Preamps and control their settings simultaneously.
Changes will then be applied to both channels while keeping any Gain value offset
(if present).
None: Max Mic input level +12dBu for 0dbFS (when Gain set to 0)
Pad: Attenuates (lowers) the mic input signal level by 12 dB > Max Mic input level
+24dBu
Boost: Increases (boosts) the mic input signal level by 12 dB > Max input level
0dBu
Note: Recommended for Ribbon Microphones that have low output.
Polarity: Polarity invert option. When lit, it inverts the polarity of the selected input
signal.
80 Hz: Low cut filter 80 Hz. Second order, 12 dB/octave.
Cut : This option allows the operator to Cut a channel input. By example to Cough
Cut a microphone input. It can also be used to avoid potential noise when
connecting or disconnecting an XLR or Jack input.
Lock: Enabling the lock option will prevent the input parameters being changed.
This could be useful for safety or in order to maintain a calibration for an external
analog processing chain.
Meters: The Meters default display scaling range goes from -90 dBFS to 0 dBFS.
Note: Refer to the General Settings in order to configure and adjust the Level meter
color range (Peak, Alignment and Decay time). Refer to the DSD section for Meters.