Merging Anubis Premium, Руководство пользователя, Страница: 89 / 138

89
Polarity: Invert the polarity of a chosen speaker in your set up. Tap a speaker to invert its polarity,
this can be useful to check or fix phase cancellation problems.
The polarity is a latching function that can be applied in addition to Mute/Solo or SoloX options.
Figure 13 Example: Polarity applied to L and R speaker channels
Clear: Use the Clear function to re-initialize the Speaker controls, this will remove all applied
controls to the speakers.
Monitor Controls (right section)
Volume Level
The top right section of the Monitor Controls section indicates the level of the currently selected
Monitor set.
Note: All Speaker sets share the same global level (unless Trim applied) while Headphones and Cues
have each their own independent level. To have different levels on your Speaker Set Monitors it is
recommended to apply a Trim on any of the Monitor Set.
Downmix
The Downmix possibilities are available within the dropdown menu and allow the operator to
Downmix to a subset of the Speaker Set. The available possibilities depend on the Speaker set
configuration. Please refer to the Downmix Table on the next page for the available downmix
listing.
Note: Each Speaker Set have their own Downmix selection (as of Firmware 1.0.10 and above)