Mercury TowSport Inboards, Руководство пользователя

Страница: 60 / 108

SPECIFICATIONS AND MAINTENANCE
Page 54 90-864197020 MARCH 2002
0069
Transmission Fluid
CHECKING WHILE ENGINE IS WARM
IMPORTANT: Engine must be operate at 1500 rpm for 2 minutes immediately prior to
checking level.
1. Velvet Drive Transmissions - Stop engine and quickly check fluid level by turning
T-handle counterclockwise, to remove dipstick. Fluid level should be up to full mark. If
low, add specified fluid through dipstick tube on transmissions.
2. Hurth Transmissions - Stop engine and remove dipstick to check level. If fluid is below
top (full) line, add specified fluid through dipstick hole. Do not overfill. Reinstall dipstick
with cap fully seated.
3. Walter V-Drive Transmissions - Stop engine and remove dipstick to check level. If fluid
is below top (full) line, add specified fluid through breather elbow. Do not overfill.
Reinstall dipstick with cap fully seated.
CHECKING WHILE ENGINE IS COLD
NOTE: Cold Fluid Level Check: To ease checking the fluid level, the dipstick can be
marked or scribed with a cold level mark.
1. Follow the procedure for the warm fluid level check, then allow the boat to sit overnight.
IMPORTANT: Be sure to push the dipstick all the way down into the dipstick tube
when checking the fluid level.
2. Remove the dipstick, wipe clean and reinsert.
3. Remove the dipstick, observe the fluid level and mark the cold fluid level.
4. Reinstall the dipstick, tighten the T-handle securely. Do NOT overtighten.
0070
CHANGING
Contact your authorized Mercury MerCruiser dealer.