Mercury TowSport Inboards, Руководство пользователя

Страница: 86 / 108

SPECIFICATIONS AND MAINTENANCE
Page 80 90-864197020 MARCH 2002
6. Snap the quick connect fitting and the water hose into the flush socket on the engine.
75423
a
a - Quick Connect Fitting
7. Start the engine within 15 seconds.
8. Operate the engine between 600 rpm and 800 rpm. Do NOT exceed 800 rpm.
9. Allow engine to reach normal operating temperature. Watch the temperature gauge on
the dash to ensure that the engine does not overheat.
10. Flush the engine for 10 minutes or until discharge water is clear.
11. Shut off the engine.
CAUTION
Do not let water run more than 15 seconds with engine not operating or too much
flushing water will collect in the muffler.
12. Within 15 seconds, disconnect the quick connect fitting and water hose from the flush
socket on the engine by pressing the release button on the flush socket.
13. Attach to the next engine, if equipped, and repeat procedure.
14. Turn off the water source.
15. Remove the quick connect fitting from the water hose.
16. Replace the blue cap into the flush socket on the engine.
17. Open the water inlet valve.