manualshive.com logo in svg

Mercury Tour Pro 109, Руководство оператора, Страница: 57 / 78

Поделиться
Скачать
Mercury Tour Pro 109 Скачать руководство пользователя страница 57

!

 CAUTION

Avoid  injury  while  operating  the  pedal.  Keep  hands  and  feet  clear  of  pinch

points.

70337

Heading lock button

Heading Lock—Course Mode Operation

IMPORTANT: If the trolling motor loses the GPS signal while in a heading lock

mode, the trolling motor will emit an error tone, automatically return to manual

mode, and continue running at the selected speed.
If Cruise control was operating while in a heading lock mode and the GPS

signal is lost, the trolling motor will emit an error tone, automatically return to

manual mode, and the trolling motor will stop.
To operate the trolling motor in heading lock—course mode:

1. Steer the trolling motor so it is pointing in the desired direction of travel.
2. Press the 

heading lock

 button on the handheld remote or foot pedal.

The trolling motor will drive the boat along the chosen heading, and will

automatically steer to compensate for wind, current, or tides to maintain course.

The trolling motor will emit an ascending chirp to indicate its status in heading

lock—course mode, and the GPS status indicator light will blink slowly.

TROLLING MOTOR INSTALLATION AND OPERATION

eng

51

  

Содержание Tour Pro 109















































































Отзывы:

Нет отзывов