manualshive.com logo in svg

Mercury Tour Pro 109, Руководство оператора, Страница: 53 / 78

Поделиться
Скачать
Mercury Tour Pro 109 Скачать руководство пользователя страница 53

To recall a stored anchor position, press and release the desired 

memory

button. The trolling motor will emit an ascending chirp to indicate that a stored

anchor position has been retrieved. If the selected anchor position button does

not have a stored anchor position, or if the anchor location is over 

one mile

away from your current location, the trolling motor will emit an error tone.
IMPORTANT: If the trolling motor loses the GPS signal while in any GPS

mode, the trolling motor will emit an error tone and automatically return to

manual mode.
IMPORTANT: When recalling a stored anchor position, the system will

calculate a straight‑line course from your current position to the selected

anchor position. Ensure that there are no obstructions to navigation between

your location and the selected anchor position—the system will recall an

anchor point even if obstructions are present. If obstructions are encountered,

navigate around them by operating in manual mode.

TROLLING MOTOR INSTALLATION AND OPERATION

eng

47

  

Содержание Tour Pro 109















































































Отзывы:

Нет отзывов