background image

Welcome

You have selected one of the finest marine power packages available. It incorporates numerous design features to

ensure operating ease and durability.
With proper care and maintenance, you will enjoy using this product for many boating seasons. To ensure maximum

performance and carefree use, we ask that you thoroughly read this manual.
The Operation and Maintenance Manual contains specific instructions for using and maintaining your product. We

suggest that this manual remain with the product for ready reference whenever you are on the water.
Thank you for purchasing one of our products. We sincerely hope your boating experience will be pleasant!
Mercury Marine, Fond du Lac, Wisconsin, U.S.A.

Name / function:

John Pfeifer, President,

Mercury Marine

Read This Manual Thoroughly

IMPORTANT: If you do not understand any portion of this manual, contact your dealer. Your dealer can also provide a

demonstration of actual starting and operating procedures.

Notice

Throughout this publication, and on your power package, warnings, cautions, and notices, accompanied by the Hazard

Symbol 

!

, may be used to alert the installer and user to special instructions concerning a particular service or

operation that may be hazardous if performed incorrectly or carelessly. Observe them carefully.
These safety alerts alone cannot eliminate the hazards that they signal. Strict compliance with these special instructions

while performing the service, plus common sense operation, are major accident prevention measures.

!

 WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

!

 CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

Indicates a situation which, if not avoided, could result in engine or major component failure.

IMPORTANT: Identifies information essential to the successful completion of the task.

NOTE: Indicates information that helps in the understanding of a particular step or action.

IMPORTANT: The operator (driver) is responsible for the correct and safe operation of the boat, the equipment aboard,

and the safety of all occupants aboard. We strongly recommend that the operator read this Operation and Maintenance

Manual and thoroughly understand the operational instructions for the power package and all related accessories before

the boat is used.

!

 WARNING

The  engine  exhaust  from  this  product  contains  chemicals  known  to  the  state  of  California  to  cause  cancer,  birth

defects or other reproductive harm.

The serial numbers are the manufacturer’s keys to numerous engineering details that apply to your Mercury Marine

power package. When contacting Mercury Marine about service, 

always specify model and serial numbers.

Descriptions and specifications contained herein were in effect at the time this was approved for printing. Mercury

Marine, whose policies are based on continuous improvement, reserves the right to discontinue models at any time or to

change specifications or designs without notice and without incurring obligation.

© 2018 Mercury Marine

6.7L Tier 3 Diesel Inboard Models

8M0117076 

 

218

eng

Содержание MerCruiser Series






































































































Отзывы: