manualshive.com logo in svg

Mercury MerCruiser Series, Руководство пользователя

Поделиться
Скачать
Mercury MerCruiser Series Скачать руководство пользователя страница 42

For each new boat model, the required propeller set should be predicted for a fully loaded vessel by a Marine Architect, and

should be verified by sea trial in conjunction with a responsible Integration Engineer. It is the responsibility of the boat

manufacturer and the selling dealer to equip the power package with the correct propellers.
It is important to achieve the engine rated speed and appropriate load factor when selecting propellers. Mercury Marine desires

a 92–95% load factor target at full throttle during the initial vessel sea trials. This load factor target provides allowance for

vessel fouling and additional loads the customer may add which are greater than the sea trial weight.
After initial propeller selection, the following common problems may require that the propeller be changed to a lower pitch:
1. Warmer weather and greater humidity cause an RPM loss.
2. Operating in a higher elevation causes an RPM loss.
3. Operating with increased load (additional passengers, accessories, etc.).
Because of the many variables of boat design, only testing will determine the best propeller for a particular application.
Refer to 

Boat in the Water Testing

 and 

Maximum RPM Test

 in the 

Engine Installation Manual

.

Getting Started

Engine Initial Break‑In Procedure

With the advancement of modern lubricants and engine construction technology, no particular engine break‑in procedure is

necessary. However, for the first 50 hours of operation, do not operate the engine at high RPM for extended periods of time.

ZF Inboard Transmission Initial Break‑in

Follow the transmission operation manual recommendations for break‑in and oil change intervals.

End of First Season Checkup

At the end of the first season of operation, contact an authorized repair facility to discuss or perform scheduled maintenance

items. If you are in an area where the product is operated continuously, year‑round, you should contact your dealer at the end

of the first 100 hours of operation or once yearly, whichever occurs first.

Section 3 - On the Water 

Page  36

90-8M0117076   

eng

  FEBRUARY 2018

Содержание MerCruiser Series






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды