Mercury KN6100M, Руководство пользователя

Страница: 14 / 47

11
Chapter 2: Motherboard Installation
Install The Motherboard
Install the motherboard in a system chassis (case). The board is an micro-
ATX size motherboard. You can install this motherboard in an ATX case.
Make sure your case has an I/O cover plate matching the ports on this
motherboard.
Connect the power connector from the power supply to the
PWR1
connector on the motherboard.
PWR2
is a +12V connecotr for CPU Vcore
power.
If there is a cooling fan installed in the system chassis, connect the system
cooling fan cable to the
SYS_FAN
fan power connector on the
motherboard.
Connect the case switches and indicator LEDs to the
PANEL1
header.
Install the motherboard in a case. Follow the case manufacturer’s instruc-
tions to use the hardware and internal mounting points on the chassis.
Pin Signal Pin Signal
1 HD) 2 FP PWR/SLP(+)
3 HD_LED_N(-) 4 FP PWR/SLP(-)
5 RESET_SW_N(-) 6 POWE)
7 RESE) 8 POWER_SW_N(-)
9 RSV D_DNU 10 KEY