Mercury KN6100M, Руководство пользователя

Страница: 36 / 47

33
Chapter 3: BIOS Setup Utility
Onboard FDC Controller
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1
This option is used to assign the I/O address and interrupt request (IRQ) for
onboard serial port 1/2.
UART Mode Select
This field is available if the Onboard Serial Port 2 field is set to any option
but Disabled. . UART Mode Select enables you to select the infrared
communication protocol-IrDA, ASKIR or SCR.
UR2 Duplex Mode
This field is available when UART Mode is set to either ASKIR or IrDA.
This item enables you to determine the infrared function of the onboard
infrared chip. The options are Full and Half (default). Full-duplex means
that you can transmit and send information simultaneously. Half-duplex is
the transmission of data in both directions, but only one direction at a time.
Onboard Parallel Port
This option is used to assign the I/O address and interrupt request (IRQ) for
the onboard parallel port.
Parallel Port Mode
Enables you to set the data transfer protocol for your parallel port. There are
four options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port),
ECP (Extended Capabilities Port) and ECP+EPP.
SPP allows data output only. Extended Capabilities Port (ECP) and En-
hanced Parallel Port (EPP) are bi-directional modes, allowing both data input
and output. ECP and EPP modes are only supported with EPP- and ECP-
aware peripherals.
ECP Mode Use DMA
When the onboard parallel port is set to ECP mode, the parallel port can use
DMA 3 or DMA 1.
SuperIO Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phonex-AwardBIOS CMOS Setup Utility
SuperIO Device
Help Item
Menu Level
x
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [Normal]
UR2 Duplex Mode Half
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP+EPP]
ECP Mode Use DMA [3]
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
x