Mercury KN6100M, Руководство пользователя

Страница: 29 / 47

26
Motherboard User’s Guide
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when your
system is started.
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was written
for an earlier generation of processors. Leave this item at the default value.
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to set the typematic
rate and the typematic delay settings for your keyboard.
• Typematic Rate (Chars/Sec): Use this item to define how many
characters per second are generated by a held-down key.
• Typematic Delay (Msec): Use this item to define how many mil-
liseconds must elapse before a held-down key begins generating
repeat characters.
Security Option (Setup)
If you have installed password protection, this item defines if the password
is required at system start up, or if it is only required when a user tries to
enter the Setup Utility.
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable
Interrupt Controller) mode. APIC provides symmetric multi-processing
(SMP) for systems, allowing support for up to 60 processors.
MPS Version Control For OS (1.4)
This item displays MPS version control for OS.
OS Select For DRAM > 64 MB (Non-OS2)
This item is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this item at
the default.
Enables or disables the display of the EPA logo during boot.
Small Logo (EPA) Show (Disabled)
Summary Screen Show ( Enabled)
This item determines whether the summary system information will be showed
during boot-up.
ATA 66/100 IDE Cable Msg. (Enabled)
This item enables or disables the display of the ATA 66/100 Cable MSG.
BIOS Write Protect (Disabled)
This item enables or disables the BIOS write protect.
BIOS Bootblock Protect (Disabled)
This item enables or disables the BIOS bootblock protect.