Mercury KN6100M, Руководство пользователя

Страница: 16 / 47

13
Chapter 2: Motherboard Installation
Here is a list of USB pin assignments.
1. Locate the F_USB1/2 header on the motherboard.
2. Plug the bracket cable onto the F_USB1/2 header.
3. Remove a slot cover from one of the expansion slots on the
system chassis. Install an extension bracket in the opening. Secure
the extension bracket to the chassis with a screw.
IR1: Infrared Port Header
The infrared port allows the wireless exchange of information between
your computer and similarly equipped devices such as printers, laptops,
Personal Digital Assistants (PDAs), and other computers.
1. Locate the infrared port-
IR1
header on the motherboard.
2. If you are adding an infrared port, connect the ribbon cable from
the port to the SIR1 header and then secure the port to an
appropriate place in your system chassis.
Pin Signal Pin Signal
1 VERG_FP_USBPWR0 2 VERG_FP_USBPWR0
3 USB_FP_P0(-) 4 USB_FP_P1(-)
5 USB) 6 USB)
7 GROUND 8 GROUND
9 KEY 10 USB_FP_OC0
Pin Signal Pin Signal
1 NC 2 KEY
3 +5V 4 GND
5 IRTX 6 IRRX
F_USB1/2: Front Panel USB Headers
The motherboard has USB ports installed on the rear edge I/O port array.
Additionally, some computer cases have USB ports at the front of the
case. If you have this kind of case, use auxiliary USB headers F_USB1/2
to connect the front-mounted ports to the motherboard.