Mercury KN6100M, Руководство пользователя

Страница: 39 / 47

36
Motherboard User’s Guide
PnP/PCI Configurations Page
These options configure how PnP (Plug and Play) and PCI expansion cards
operate in your system. Both the the ISA and PCI buses on the motherboard
use system IRQs (Interrup ReQuests) and DMAs (Direct Memory Access).
You must set up the IRQ and DMA assignments correctly through the PnP/
PCI Configurations Setup utility for the motherboard to work properly.
Selecting PnP/PCI Configurations on the main program screen displays this
menu:
Init Display First
This item allows you to choose the primary display card.
IRQ Resources
In the IRQ Resources submenu, if you assign an IRQ to Legacy ISA, then
that Interrupt Request Line is reserved for a legacy ISA expansion card.
Press <Esc> to close the IRQ Resources submenu.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some
nonstandard VGA cards. This board includes a built-in VGA system that
does not require palette snooping so you must leave this item disabled.
Maximum Payload Size
This item specifies the maximum payload size for the PCI Express function.
Assign IRQ For VGA/USB
Names the interrupt request(IRQ) line assigned to the VGA/USB on your
system. Activity of the selected IRQ always awakens the system.
Phonex-AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Help Item
Menu Level
Default is Disabled. Select Enabled to
reset Extended System Configuration
Data ESCD) when you exit Setup if you
have installed a new add-on and the sys-
tem reconfiguration has caused such a
serious conflict that the OS cannot boot
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
Init Display First [PCI Slot]
PNP OS Installed No
IRQ Resources [Press Enter]
PCI/VGA Palette Snoop [Disabled]
Assign IRQ For VGA Enabled
Assign IRQ For USB [Enabled]
** PCI Express relative items**
Maximum Payload Size [4096]