Mercury Racing HP1075 SCi, Инструкция по эксплуатации, техническому обслуживанию и гарантии

Страница: 55 / 103

MAINTENANCE
47
Interval Task
Every 100 hours of operation or
once yearly, whichever occurs
first.
Perform 25 and 50 hour
maintenance items
Seawater pickup pump ‑
Disassemble and Inspect
Engine alignment ‑ Check
Every 100 to 120 hours of
operation
Inspect all rotating and reciprocating
components for wear. Replace
components as needed.
Every 200 hours
Sterndrive oil and filter ‑ After the
initial 25 hour oil and filter change,
change the oil and filter every 200
hrs.
Checking Fluid Levels
CHECKING ENGINE OIL (RESERVOIR)
Oil consumption is greatly dependant upon engine speed, with
consumption being highest at wide‑open‑throttle and decreasing
substantially as engine speed is reduced. It is not uncommon for big block
high performance engines to use up to one quart of oil in one to five hours
if the engine is operated continuously at the upper end of the RPM range.
1. With the engine at idle, observe the oil reservoir sight tube.
a
7423
a - Oil reservoir sight tube
2. Oil level in the reservoir sight tube should be approximately even with
the bottom of the reservoir split ring.