SPECIFICATIONS
26
Engine Break‑in
!
CAUTION
Severe damage to the engine can result by not complying with the Engine
Break‑in Procedure.
1 Hr. Break‑in Procedure
•
Do not exceed 5000 RPM
5 Hr. Break‑in Procedure
•
Allow engine to warm‑up for 3‑5 minutes.
•
Do not exceed 3/4 throttle.
•
Avoid full throttle acceleration from idle speed.
•
Always vary throttle setting.
•
Run engine the majority of time between 2500 ‑ 4500 RPM.
•
Frequently check engine oil level at reservoir sight tube. Add oil if
needed. It is normal for oil consumption to be high during break‑in
period.
After Break‑In Period
To help extend the life of your power package, Mercury Marine
recommends the following:
After 5 hr. Break‑in
•
Use a propeller that allows the engine to operate at or near the top
of the maximum RPM range (See Specifications section) when at
full throttle with a normal boat load.
•
Do not advance the throttle until the engine runs smoothly at idle and
water temperature reaches a minimum of 54 °C (130 °F). Do not
operate at full throttle until the engine oil temperature reaches 60 °
C (140 °F).
•
Follow the maintenance schedule in this manual.
Содержание HP1075 SCi
Страница 4: ...iv...
Страница 8: ...viii...
