Mercury Racing HP1075 SCi Скачать руководство пользователя страница 25

Страница: 25 / 103

GENERAL INFORMATION

Know signs of weather change and avoid foul weather and rough‑sea

boating.
Tell someone where you are going and when you expect to return.
Know and obey all nautical rules and laws of the waterways. Boat operators

should complete a boating safety course. Courses are offered in the U.S.A.

by:
1. The U.S. Coast Guard Auxiliary
2. The Power Squadron
3. The Red Cross
4. Your state boating law enforcement agency
Direct all inquiries to the Boating Hotline, 1‑800‑368‑5647 or the Boat U.S.

Foundation information number 1‑800‑336‑BOAT.
We strongly recommend that all powerboat operators attend one of these

courses.
Make sure everyone in the boat is properly seated. Do not allow anyone to

sit or ride on any part of the boat that was not intended for such use. This

includes the back of seats, gunwales, transom, bow, decks, raised fishing

seats, any rotating fishing seat; or anywhere that an unexpected

acceleration, sudden stopping, unexpected loss of boat control, or sudden

boat movement could cause a person to be injured or thrown overboard.
Never be under the influence of alcohol or drugs while boating (it is the

law). Alcohol or drug use impairs your judgment and greatly reduces your

ability to react quickly.
Know your boating area and avoid hazards.
Prepare other boat operators. Train at least one other person on board in

boat operation and handling in case the driver becomes disabled or falls

overboard.
Passenger boarding. Stop the engine whenever passengers are boarding,

unloading, or are near the back (stern) of the boat. Just shifting the power

package into neutral is not sufficient.
Be alert. The operator of the boat is responsible by law to maintain a proper

lookout by sight and hearing. The operator must have an unobstructed view

particularly to the front. No passengers, load, or fishing seats should block

the operators view when operating the boat.
Never follow behind a water skier. As an example, your boat traveling at

40 km/h (25 MPH) will overtake a fallen skier 61 m (200 ft.) in front of you

in five seconds.

Содержание HP1075 SCi








































































































Результаты поиска

Содержание HP1075 SCi

Отзывы:

Похожие инструкции для HP1075 SCi

Бренды по названию

Популярные бренды

Mercury Racing HP1075 SCi, Инструкция по эксплуатации, техническому обслуживанию и гарантии

Результаты поиска

Содержание HP1075 SCi

Отзывы:

Похожие инструкции для HP1075 SCi

Бренды по названию

Популярные бренды