background image

Section 1 - Warranty 

Page  6

90-864197072   NOVEMBER  2007

Use of the product for racing or other competitive activity, or operating with a racing‑type lower unit at any point, even by a previous

owner of the product, voids the warranty. Expenses related to haul‑out, launch, towing, storage, telephone, rental, inconvenience,

slip fees, insurance coverage, loan payments, loss of time, loss of income, or any other type of incidental or consequential damages

are not covered by this warranty. Also, expenses associated with the removal or replacement of boat partitions or other material in

order to gain access to the product are not covered by this warranty. No individual or entity, including Mercury Marine authorized

dealers, has been given authority by Mercury Marine to make any affirmation, representation, or warranty regarding the product,

other than those contained in this limited warranty. If such affirmation, representation, or warranty is made, it shall not be enforceable

against Mercury Marine.

DISCLAIMERS AND LIMITATIONS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. TO THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN
DURATION TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED
FROM COVERAGE UNDER THIS WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS,
LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE. AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE
TO STATE AND COUNTRY TO COUNTRY.

3‑Year Limited Warranty Against Corrosion

3-YEAR LIMITED WARRANTY AGAINST CORROSION
What Is Covered

Mercury Marine warrants that each new Mercury, Mariner, Mercury Racing, Sport Jet, M

2

 Jet Drive, Tracker

by Mercury Marine Outboard, MerCruiser Inboard or Sterndrive engine (Product) will not be rendered

inoperative as a direct result of corrosion for the period of time described below.

Duration of Coverage

This limited corrosion warranty provides coverage for three (3) years from either the date the product is first

sold, or the date on which the product is first put into service, whichever occurs first. The repair and

replacement of parts, or the performance of service under this warranty does not extend the life of this

warranty beyond its original expiration date. Unexpired warranty coverage can be transferred to subsequent

(noncommercial use) purchaser upon proper re‑registration of the product. Warranty coverage is terminated

for used product repossessed from a retail customer, purchased at auction, from a salvage yard, or from an

insurance company that obtained the product as a result of an insurance claim.

Condition That Must Be Met in Order to Obtain Warranty Coverage

Warranty coverage is available only to retail customers that purchase from a dealer authorized by Mercury

Marine to distribute the product in the country in which the sale occurred, and then only after the Mercury

Marine specified pre‑delivery inspection process is completed and documented. Warranty coverage

becomes available upon proper registration of the product by the authorized dealer. Corrosion prevention

devices specified in the Operation, Maintenance & Warranty manual must be in use on the boat, and routine

maintenance outlined in the Operation, Maintenance & Warranty manual must be timely performed (including

without limitation the replacement of sacrificial anodes, use of specified lubricants, and touch‑up of nicks

and scratches) in order to maintain warranty coverage. Mercury Marine reserves the right to make warranty

coverage contingent upon proof of proper maintenance.

What Mercury Will Do

Mercury's sole and exclusive obligation under this warranty is limited to, at our option, repairing a corroded

part, replacing such part or parts with new or Mercury Marine certified re‑manufactured parts, or refunding

the purchase price of the Mercury product. Mercury reserves the right to improve or modify products from

time to time without assuming an obligation to modify products previously manufactured.

How to Obtain Warranty Coverage

The customer must provide Mercury with a reasonable opportunity to repair, and reasonable access to the

product for warranty service. Warranty claims shall be made by delivering the product for inspection to a

Mercury dealer authorized to service the product. If purchaser cannot deliver the product to such a dealer,

written notice must be given to Mercury. We will then arrange for the inspection and any covered repair.

Purchaser in that case shall pay for all related transportation charges and/or travel time. If the service

provided is not covered by this warranty, purchaser shall pay for all related labor and material, and any other

expenses associated with that service. Purchaser shall not, unless requested by Mercury, ship the product

or parts of the product directly to Mercury. Proof of registered ownership must be presented to the dealer at

the time warranty service is requested in order to obtain coverage.

What Is Not Covered

Содержание 6.2 MPI















































































































Отзывы: