MerCruiser 6.2 MPI Скачать руководство пользователя страница 25

Страница: 25 / 110

Section 2 - Getting to Know Your Power Package

90-864197072 NOVEMBER 2007

Page 17

Reference

Gauge

Function

Fuel gauge

Indicates quantity of fuel in tank.

Hour meter

Records engine operating time.

Bilge blower switch

Operates the bilge blower.

Ignition switch

Allows the operator to start and stop engine.

Remote Controls (Non‑DTS Models)

Remote Controls

Your boat may be equipped with a Mercury Precision Parts or Quicksilver remote controls.

All controls may not have all features shown. Consult your dealer for a description and/or

demonstration of your remote control.

PANEL MOUNT FEATURES

17355

a -

Neutral lock button

b -

Throttle only button

c -

Lanyard stop switch

d -

Control handle tension adjustment

screw

e -

Control handle

Neutral Lock Button -

Prevents accidental shift and throttle engagement. Neutral lock

button must be pushed in to move the control handle out of neutral.

Throttle Only Button -

Allows engine throttle advancement without shifting the engine.

This is done by disengaging the shift mechanism from the control handle. The throttle only

button can be depressed only when the remote control handle is in the neutral position,

and should only be used to assist in starting the engine.

Lanyard Stop Switch -

Turns the ignition off whenever the operator (when attached to the

lanyard) moves far enough away from the operator's position to activate the switch. Refer

Lanyard Stop Switch

for information on the use of this switch.

Control Handle -

Operation of the shift and throttle are controlled by the movement of the

control handle. Push the control handle forward from neutral with a quick firm motion to the

first detent for forward gear. Continue pushing forward to increase speed. Pull the control

handle back from neutral with a quick firm motion to the first detent for reverse gear and

continue pushing back to increase speed.

Control Handle Tension Adjustment Screw - (not visible)

This screw is used to adjust

the effort required to move the remote control handle. Refer to instructions provided with

remote control for complete adjustment instructions.

Содержание 6.2 MPI















































































































Результаты поиска

Содержание 6.2 MPI

Отзывы:

Похожие инструкции для 6.2 MPI

Бренды по названию

Популярные бренды

MerCruiser 6.2 MPI, Руководство пользователя

Результаты поиска

Содержание 6.2 MPI

Отзывы:

Похожие инструкции для 6.2 MPI

Бренды по названию

Популярные бренды