MerCruiser 6.2 MPI Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 110

background image

Section 5 - Maintenance

Page 50

90-864197072 NOVEMBER 2007

Owner/Operator Responsibilities

It is the operator's responsibility to perform all safety checks, to ensure that all lubrication

and maintenance instructions are complied with for safe operation and to return the unit to

an authorized Mercury MerCruiser dealer for a periodic checkup.
Normal maintenance service and replacement parts are the responsibility of the owner/

operator and as such, are not considered defects in workmanship or material within the

terms of the warranty. Individual operating habits and usage contribute to the need for

maintenance service.
Proper maintenance and care of your power package will ensure optimum performance

and dependability and will keep your overall operating expenses at a minimum. See your

authorized Mercury MerCruiser dealer for service aids.

Dealer Responsibilities

In general, a dealer's responsibilities to the customer include predelivery inspection and

preparation such as:
• Ensure that the boat is properly equipped.
• Prior to delivery, make certain that the Mercury MerCruiser power package and other

equipment are in proper operating condition.

• Make all necessary adjustments for maximum efficiency.
• Familiarize the customer with the on‑board equipment.
• Explain and demonstrate the operation of the power package and boat.
• Provide you with a copy of a Predelivery Inspection Checklist.
• Your selling dealer should fill out the Warranty Registration Card completely and mail

it to the factory immediately upon sale of the new product.

Maintenance

!

WARNING

Performing service or maintenance without first disconnecting the battery can cause

product damage, personal injury, or death due to fire, explosion, electrical shock, or

unexpected engine starting. Always disconnect the battery cables from the battery before

maintaining, servicing, installing, or removing engine or drive components.

!

WARNING

Fuel vapors trapped in the engine compartment may be an irritant, cause difficulty

breathing, or may ignite resulting in a fire or explosion. Always ventilate the engine

compartment before servicing the power package.

IMPORTANT: Refer to the maintenance schedule for complete listing of all scheduled

maintenance to be performed. Whereas you can perform some items, others should be

performed only by an authorized Mercury MerCruiser dealer. Before attempting

maintenance or repair procedures not covered in this manual, we recommend that you

purchase a Mercury MerCruiser service manual and read it thoroughly.

NOTE: Maintenance points are color coded for ease of identification. See the decal on

engine for identification.

«
...
56
57
58
59
60
...
»

Содержание 6.2 MPI















































































































Отзывы:

Нет отзывов

Похожие инструкции для 6.2 MPI

Бренд: Daytona Страницы: 18

Бренд: Daedong Страницы: 51

MWM INTERNATIONAL MaxxForce 9.3P

Бренд: Navistar Страницы: 126

Бренд: RCV Страницы: 4

Бренд: M.T.H. Страницы: 26

Бренд: Volvo Penta Страницы: 84

Бренд: Volvo Penta Страницы: 88

Бренд: O.S. engine Страницы: 17

Бренд: O.S. engine Страницы: 20

Бренд: Panther Страницы: 7

Бренд: Baumuller Страницы: 34

Бренд: ST Страницы: 251

Бренд: Kyosho Страницы: 12

Бренд: Bticino Страницы: 4

Бренд: LinMot Страницы: 48

Бренд: Tecno Automazione Страницы: 2

Бренд: Wood-mizer Страницы: 208

Бренд: A'OK Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды