MerCruiser 6.2 MPI Скачать руководство пользователя страница 30

Страница: 30 / 110

Section 2 - Getting to Know Your Power Package

Page 22

90-864197072 NOVEMBER 2007

Console Mount Features‑ Dual Engine

ACTIVE

SYNC

THROTTLE

ONLY

STATION SELECT

17365

a -

Control handles

b -

Active light

c -

Neutral light

d -

Select key

e -

Arrow trackpad

f -

Sync light

g -

Throttle only/station select key

h -

Detent tension adjustment

i -

Control handle friction adjustment

screw

Control Handle -

Operation of the shift and throttle are controlled by the movement of the

control handle. Push the control handle forward from neutral with a quick, firm motion to

the first detent for forward gear. Continue pushing forward to increase speed. Pull the

control handle back from neutral with a quick, firm motion to the first detent for reverse gear

and continue pushing back to increase speed.

Active Light -

The active light is illuminated to show the remote control is active and ready

for use.

Neutral Light -

The neutral light is illuminated when the engine is in neutral gear position.

Select Key -

Selects System View on‑screen options and confirms data entries.

Arrow Trackpad -

Navigates through System View on‑screen function messages.

Sync Light -

The sync light is illuminated when the RPM of the two engines are being

synchronized by the DTS system.

Throttle Only/Station Select Key -

Allows engine throttle advancement without shifting

the engine. The throttle only/station select button also allows the boat operator to select

which remote control is in control of the engine operation when operating with multiple

helms. Refer to

Dual Helm Station Transfer

Detent Tension Adjustment Screw -

This screw can be adjusted to increase or decrease

the effort required to move the control handle out of the detent positions (cover must be

removed). Turning the screw clockwise will increase tension.

Control Handle Friction Adjustment Screw -

This screw can be adjusted to increase or

decrease the tension on the control handle (cover must be removed). This will help prevent

unwanted motion of the handle in rough water. Turn the screw clockwise to increase

tension and counterclockwise to decrease tension.

Synchronizing Dual Engines

The auto synchronizing feature, when engaged, will automatically adjust the port engine

speed to match the speed of the starboard engine.
Synchronizing of engines will automatically engage when the speed of both engines are

over 900 RPM for two seconds and remote control handles are positioned within 5° of each

other.

Содержание 6.2 MPI















































































































Результаты поиска

Содержание 6.2 MPI

Отзывы:

Похожие инструкции для 6.2 MPI

Бренды по названию

Популярные бренды

MerCruiser 6.2 MPI, Руководство пользователя

Результаты поиска

Содержание 6.2 MPI

Отзывы:

Похожие инструкции для 6.2 MPI

Бренды по названию

Популярные бренды