smart Wallbox
Important information
3
> Please ensure that minimum clearances of 50 cm are kept on all sides of the Wallbox during and after
installation.
> Only use accessories intended and sold for the device by smart.
> Do not install this Wallbox in close vicinity to running water or water jets: The smart Wallbox Home is
protected against water entering the device according to IP 55.
> The smart Wallbox Home must not be installed in areas subject to flooding.
> The smart Wallbox Home must not be installed in explosive atmosphere areas (EX areas).
> The smart Wallbox Home must not be covered with stickers or other objects or materials to ensure suf-
ficient air circulation at all times.
> No liquids, objects or receptacles containing liquids must be placed on the housing.
> Please note that additional overvoltage protection may be required depending on the connected vehicle
and/or national regulations.
> Please note that the fixed charging cable of the smart Wallbox Home must not be extended with connec-
tors, adapter cables or in any other way during operation.
> Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the Wallbox may
lead to malfunctions and should therefore be avoided.
> This device is not intended to be used by persons with limited physical, sensory or mental abilities
(including children) and/or who lack knowledge, unless they are supervised by someone responsible for
their safety or have received instructions from such a person on how to use the device.
> Children must be supervised so that they do not play with the device.
> Please note that the smart Wallbox Home may be installed and operated at elevations of max. 2,000 me-
ters AMSL (above mean sea level).
General product information.
This smart Wallbox Home represents the current state of technology and complies with all current tech-
nical safety requirements, guidelines and standards. The safety notices in this manual serve to ensure
the proper and safe installation as well as subsequent operation of the device. Disregard of or actions
contrary to the safety information and instructions contained in this manual may lead to electric shock,
fire, severe or fatal injury.
The smart Wallbox Home must be installed by a qualified specialist electrical contractor, connected ac-
cording to local regulations and provisions, and subsequently checked and approved for operation.
Malfunctions affecting the safety of persons, connected vehicles or the device itself must be repaired by
an authorized specialist electrical contractor only.
Should a malfunction occur with your Wallbox, please first read the sections regarding „Error detection
and solutions.“ on page 19. Should the fault or malfunction recur and still not be able to be resolved,
please contact your local smart technical support.
Have the Wallbox taken out of operation and replaced by a qualified specialist electrical contractor or
contact your local smart technical support if:
> the housing has been damaged mechanically,
Содержание smart Wallbox Home
Страница 1: ...smart Wallbox Home Installation manual for specialist electrical contractors ...
Страница 4: ......