Mercedes-Benz S 560 4MATIC, Руководство оператора

Страница: 55 / 506

passenger seat and rear seats do not slacken
once the child restraint system is secured.
The seat belts on the following seats are equip‐
ped with a child seat safety feature:
R
Front passenger seat
R
Rear seats
#
To install a child restraint system: when
installing a child restraint system, always
observe the manufacturer's installation and
operating instructions as well as the informa‐
tion in this Operator's Manual.
#
Pull the seat belt smoothly from the seat belt
outlet.
#
Engage the seat belt tongue in the seat belt
buckle.
#
To activate the child seat safety feature:
pull the seat belt out fully and let the inertia
reel retract it again.
When the child seat safety feature is activa‐
ted, you will hear a ratcheting sound.
#
Push the child restraint system down until
the seat belt sits tightly.
#
To deactivate the child seat safety fea‐
ture: press the release button of the seat
belt buckle.
#
Hold the seat belt tongue and guide back to
the seat belt outlet.
Installing a LATCH-type (ISOFIX) child
restraint system on the rear seat
Installing a LATCH-type (ISOFIX) child
restraint system on the rear seat
&
WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system is exceeded
Too much load may be placed on the LATCH-
type (ISOFIX) child seat securing systems
and the child may not be restrained in the
event of an accident, for example.
#
If the child and the child restraint sys‐
tem together weigh more than the per‐
missible gross mass of 73 lb (33 kg),
use only a LATCH-type (ISOFIX) child
restraint system that secures the child
with the vehicle seat belt.
#
Also secure the child restraint system
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
R
in the manufacturer's installation and operat‐
ing instructions for the child restraint system
used
R
on a label on the child restraint system, if
present
Regularly check that the permissible gross mass
of the child and child restraint system is still
complied with.
When installing a child restraint system, observe
the following:
O Always observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
O Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
Occupant safety 53