Mercedes-Benz S 560 4MATIC, Руководство оператора

Страница: 352 / 506

If a tire pressure of 180 kPa (1.8 bar/26 psi)
has been attained after eight minutes:
&
WARNING Risk of accident from driving
with sealed tires
A tire temporarily sealed with tire sealant
impairs the handling characteristics and is
not suitable for higher speeds.
#
Adapt your driving style accordingly and
drive carefully.
#
Do not exceed the maximum speed
limit with a tire that has been repaired
using tire sealant.
Observe the maximum permissible speed for a
tire sealed with tire sealant 50 mph (80 km/h).
#
Affix the upper section of the TIREFIT sticker
to the instrument cluster in a location where
it will be easily seen by the driver.
* NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
+ ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
#
Have the tire sealant bottle disposed of
professionally, e.g. at an authorized
Mercedes-Benz Center.
#
Switch off the tire inflation compressor.
#
Unscrew the filling hose from the valve of the
faulty tire.
#
Stow the tire sealant bottle, the tire inflation
compressor and the warning triangle.
#
Pull away immediately.
#
Stop driving after approximately ten minutes
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
&
WARNING Risk of accident due to the
specified tire pressure not being attained
If the specified tire pressure is not reached,
the tire is too badly damaged. The tire seal‐
ant cannot repair the tire in this instance.
The braking and driving characteristics may
be greatly impaired.
#
Do not continue driving.
#
Consult a qualified specialist workshop.
In cases such as the one mentioned above, con‐
tact an authorized Mercedes-Benz Center. Or
call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
#
Correct the tire pressure if it is still at least
130 kPa (1.3 bar/19 psi). You will find the
values in the Tire and Loading Information
placard on the B-pillar on the driver's side or
in the tire pressure table in the fuel filler flap.
#
To increase the tire pressure: switch on
the tire inflation compressor.
350 Breakdown assistance