Mercedes-Benz S 350 BlueTEC 4MATIC, Руководство оператора

Страница: 348 / 542

HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R
when pulling away, especially on steep
slopes
R
when maneuvering on steep slopes
R
when waiting in traffic
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
G
WARNING
HYBRID vehicles: It is imperative that you read
the HYBRID Supplemental Operating
Instructions included in your vehicle literature
portfolio. You may otherwise not receive all
necessary safety information and warning for
the operation of your vehicle.
Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary.
R
the driver's door is closed or your seat belt
is fastened.
R
the electric parking brake is released.
R
the hood is closed.
R
the transmission is in position R, N or D.
The trunk lid must be closed in position R.
R
DISTRONIC PLUS is deactivated.
Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
until ë appears in the instrument
cluster.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
G
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
R
you accelerate and the transmission is in
position D or R.
R
you shift the transmission to position P.
R
you apply the brakes again with a certain
amount of pressure until ë disappears
from the instrument cluster.
R
you secure the vehicle using the electric
parking brake.
R
you activate DISTRONIC PLUS.
i
After a time, the electric parking brake
secures the vehicle and relieves the service
brake.
G WARNING
Never get out of the vehicle when the HOLD
function is activated.
The HOLD function must never be operated
or deactivated by a passenger or from outside
the vehicle.
The HOLD function does not replace the
electric parking brake and must not be used
for parking.
The braking effect of the HOLD function is
canceled and the vehicle could roll away if:
R
the HOLD function is deactivated by
depressing the accelerator pedal or the
brake pedal.
R
there is a malfunction in the system or an
interruption in the power supply, e.g.
battery failure.
346
Driving systems
Driving
and
parking