Mercedes-Benz S 350 BlueTEC 4MATIC, Руководство оператора

Страница: 274 / 542

cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
To switch on: select Æ and press W .
X
To switch off: select Æ and press W .
A tick appears.
Controlling climate control centrally
You can use the
Mono function to set all the
air-conditioning zones in the vehicle to the
same settings. If the Mono function is
switched on and you adjust climate control
on the driver’s side, these changes will also
be made in all the air-conditioning zones.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Select Mono and press W .
A tick appears when the function is
selected.
The Mono function is automatically switched
off if you:
R
change settings for automatic climate
control on the front-passenger side using
COMAND
R
press one of the rocker switches to operate
automatic climate control on the front-
passenger side
R
press one of the rocker switches on the
rear-compartment control panel
Adjusting the footwell temperature
You can use the
Footwell Temperature
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i
This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Select Footwell Temperature and press
W .
A scale appears.
X
To change the temperature difference:
slide ZV Æ or turn cVd .
X
To confirm your selection: press W .
272
Vehicle
COMAN
D