Mercedes-Benz S 350 BlueTEC 4MATIC, Руководство оператора

Страница: 285 / 542

Combination switch
Turn signals
:
High-beam headlamps
;
Right turn signal
=
High-beam flasher
?
Left turn signal
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ? .
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ? .
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L .
X
Press the combination switch beyond the
pressure point in the direction of
arrow : .
The K indicator lamp in the instrument
cluster lights up.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
X
Pull the combination switch in the direction
of arrow = .
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
R
an air bag is deployed.
R
the vehicle is slowed down rapidly from a
speed of over 45 mph (70 km/h) and
comes to a halt.
X
To switch on the hazard warning lamps:
press button : .
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
X
To switch off the hazard warning
lamps: press button : .
If the vehicle returns to a speed of over
6 mph (10 km/h) after a full application of the
brakes, the hazard warning lamps are
deactivated automatically.
i
The hazard warning lamps still operate if
the ignition is switched off.
Exterior lighting
283
Lights
and
windshield
wipers
Z