Mercedes-Benz Mercedec-AMG GT R, Руководство пользователя

Страница: 339 / 441

shop. The new wheel must have the
correct dimensions.
Observe the following notes on fitting an emer‐
gency spare wheel:
R
Check the tyre pressure of the emergency
spare wheel fitted. Correct the pressure as
necessary.
R
The maximum permissible speed with an
emergency spare wheel fitted is 80 km/h.
R
Do not fit the emergency spare wheel with
snow chains.
R
Replace the emergency spare wheel after six
years at the latest, regardless of wear.
% Vehicles with a tyre pressure monitoring
system: if an emergency spare wheel is fit‐
ted the tyre pressure monitoring system can‐
not function reliably. For a few minutes after
an emergency spare wheel is fitted, the sys‐
tem may still display the tyre pressure of the
removed wheel. Only restart the system
again when the emergency spare wheel has
been replaced with a new wheel.
Be sure to also observe the following further
related subjects:
R
Notes on tyre pressure (
/
page 322)
R
Tyre pressure table (
/
page 323)
R
Notes on fitting tyres (
/
page 325)
Inflating the emergency spare wheel
* NOTE Overheating due to the tyre infla‐
tion compressor running too long
#
Do not run the tyre inflation compres‐
sor for longer than ten minutes without
interruption.
Requirements:
Comply with the manufacturer's safety notes on
the sticker of the emergency spare wheel and on
the tyre inflation compressor.
#
Remove sticker with the label 80 km/h from
the tyre inflation compressor housing and
affix it to the instrument cluster within the
driver's field of vision.
#
Remove the tyre inflation compressor from
the stowage well under the boot floor .
(
/
page 306)
#
Pull filler hose 1 and plug 3 out of the tyre
inflation compressor housing.
#
Insert plug 7 of filler hose 1 in the socket
on the tyre inflation compressor and then
turn it until plug 7 engages.
#
Unscrew the cap from the valve on the emer‐
gency spare wheel.
#
Screw union nut 2 of filler hose 1 onto
valve.
336 Wheels and tyres