Mercedes-Benz Mercedec-AMG GT R, Руководство пользователя

Страница: 300 / 441

% In car washes with a conveyor system: if you
would like to leave the vehicle while it is
being washed, make sure the key is located
in the vehicle. The park position j is other‐
wise automatically engaged.
% If, after the car wash, you remove the wax
from the windscreen and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Information on using a high-pressure cleaner
& WARNING Risk of an accident when
using high-pressure cleaners with round-
spray nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex‐
pectedly fail.
#
Do not use a high-pressure cleaner with
round-spray nozzles.
#
Have damaged tyres or chassis parts
replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a high-pressure cleaner:
R
keep the key at least 3 m away from the vehi‐
cle. Otherwise the tailgate could open unin‐
tentionally.
R
maintain a distance of at least 30 cm to the
vehicle.
R
vehicles with decorative foil: parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm
between the foil-covered parts of the vehicle
and the nozzle of the high-pressure cleaner.
Move the high-pressure cleaner nozzle
around whilst cleaning. The water tempera‐
ture of the high-pressure cleaner must not
exceed 60 °C.
R
observe the information on the correct dis‐
tance in the equipment manufacturer's oper‐
ating instructions.
R
do not point the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical components, batteries,
light sources and ventilation slots.
Washing the vehicle by hand
Observe the legal requirements, e.g. in a number
of countries, washing by hand is only permitted
in specially designated wash bays.
#
Use a mild cleaning agent, e.g. car shampoo.
#
Wash the vehicle with lukewarm water using
a soft car sponge. When doing so, do not
expose the vehicle to direct sunlight.
#
Carefully hose the vehicle off with water and
dry using a chamois. Take care not to point
the water jet directly towards the air inlet
grille below the bonnet.
Notes on paintwork/matt finish paintwork
care
Observe the notes on cleaning and care to avoid
damaging the paintwork.
Paint
R
Insect remains: soak with insect remover and
rinse off the treated areas afterwards.
R
Bird droppings: soak with water and rinse off
afterwards.
Maintenance and care 297