Mercedes-Benz GLE Coupe 2021, Руководство пользователя

Страница: 329 / 589

#
Ensure there is sufficient ground clear‐
ance between the underbody and the
guide rails of the car wash.
#
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is sufficient.
To avoid damage to your vehicle when using a
car wash, ensure the following beforehand:
R
Active Distance Assist DISTRONIC is deacti‐
vated.
R
the HOLD function is switched off.
R
the 360° Camera or the reversing camera is
switched off.
R
the side windows and sliding sunroof are
completely closed.
R
the blower for the ventilation/heating is
switched off.
R
the windscreen wiper switch is in position
g .
R
the key is at a minimum distance of 3 m
away from the vehicle. Otherwise the tailgate
could open unintentionally.
R
for car washes with a conveyor system:
-
neutral i is engaged.
-
If you would like to leave the vehicle while
it is being washed, make sure the key is
located in the vehicle. The park position
j is otherwise automatically engaged.
R
Do not make any hand movements in the
area of the overhead control panel or deacti‐
vate (
/
page 280) the Sliding sunroof and
roller sunblind option in the settings for the
MBUX interior assistant.
% If, after the car wash, you remove the wax
from the windscreen and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Information on using a high-pressure cleaner
&
WARNING Risk of an accident when
using high-pressure cleaners with round-
spray nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex‐
pectedly fail.
#
Do not use a high-pressure cleaner with
round-spray nozzles.
#
Have damaged tyres or chassis parts
replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a high-pressure cleaner:
R
The key is at a minimum distance of 3 m
away from the vehicle. Otherwise the tailgate
could open unintentionally.
R
Maintain a distance of at least 30 cm to the
vehicle.
R
Vehicles with decorative foil: Parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm
between the foil-covered parts of the vehicle
and the nozzle of the high-pressure cleaner.
Move the high-pressure cleaner nozzle
around whilst cleaning. The water tempera‐
ture of the high-pressure cleaner must not
exceed 60°C.
326 Maintenance and care