Mercedes-Benz GLE Coupe 2021, Руководство пользователя

Страница: 264 / 589

#
Remove the cover cap from the ball head and
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the
trailer.
Folding the ball neck in
#
Pull switch 2 until the ball neck unlocks.
The ball neck will fold up under the rear
bumper.
Indicator lamp
1 will flash.
#
Push the ball neck in the direction of the
arrow until it engages audibly behind the
bumper.
Indicator lamp 1 and the display on the
driver's display will disappear.
Observe the information about the notifications
on the driver's display:
R
Indicator and warning lamps (
/
page 535)
R
Display messages (
/
page 474)
Coupling up/uncoupling a trailer
Requirements:
R
The ball neck is extended and engaged in a
securely locked position.
Trailers with a 7-pin plug can be connected to
the vehicle with the following adapters:
R
Adapter plug
R
Adapter cable
The trailer will be correctly detected by the vehi‐
cle only if the following conditions are met:
R
The trailer is connected correctly.
R
The trailer lighting system is in working
order.
The functions of the following systems will be
affected by a correctly connected trailer:
R
ESP
®
trailer stabilisation
R
Trailer Manoeuvering Assist
R
Active Lane Keeping Assist
R
Parking Assist PARKTRONIC
R
Active Parking Assist
R
Blind Spot Assist or Active Blind Spot Assist
R
Drive Away Assist
R
Cross traffic warning
R
Manoeuvering brake function
R
Reversing camera
R
360° Camera
Coupling up a trailer
* NOTE Damage to the starter battery due
to full discharge
Charging the trailer battery using the power
supply of the trailer can damage the starter
battery.
#
Do not use the vehicle's power supply
to charge the trailer battery.
#
Remove the cover cap from the ball head and
store it in a safe place.
#
Position the trailer on a level surface behind
the vehicle and couple it up to the vehicle.
Driving and parking 261