Mercedes-Benz GLC Coupe 2016, Руководство пользователя

Страница: 357 / 377

X
Mercedes-AMG vehicles and vehicles
with AMG equipment: fold cover ?
upwards.
X
Position jack B at jacking point A .
X
Make sure that the base of the jack is posi-
tioned vertically under the jacking point.
X
Turn crank C clockwise until jack B sits
completely on jacking point A . The base of
the jack must lie evenly on the ground.
X
Turn crank C until the tyre is raised a maxi-
mum of 3 cm off the ground.
Removing a wheel
!
Mercedes AMG vehicles with ceramic-
brake disc: during removal and repositioning
of the wheel, the wheel rim can strike the
ceramic-brake disc and damage it. Therefore,
take precautions and have a second person
assist you. Alternatively, you can use a sec-
ond centring pin.
!
Do not place wheel bolts in sand or dirt. The
threads of the wheel bolts and wheel hubs
could otherwise be damaged when the bolts
are tightened.
When fitting/removing wheels, and for as long
as the wheels are removed, avoid applying any
external force on the brake discs. This could
impair the level of comfort when braking.
X
Unscrew the uppermost wheel bolt com-
pletely.
X
Screw centring pin : into the thread instead
of the wheel bolt.
X
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
Fitting a new wheel
G
WARNING
Oiled or greased wheel bolts or damaged
wheel bolts/hub threads can cause the wheel
bolts to come loose. As a result, you could
lose a wheel while driving. There is a risk of
accident.
Never oil or grease wheel bolts. In the event of
damage to the threads, contact a qualified
specialist workshop immediately. Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving.
G
WARNING
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip
over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.
It is imperative to observe the instructions and
safety notes on "Changing a wheel"
(
Y
page 350).
Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety rea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been approved
354
Changing a wheel
Wheels
and
tyres