Setting the dipped-beam headlamps for
driving on the left/right
This function is only available in vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
Y
page 114).
X
Press
ò
on the steering wheel to open the
menu list.
X
Press
:
or
9
on the steering wheel to
select the
Settings
Settings
menu.
X
Confirm by pressing
a
on the steering
wheel.
X
Press
:
or
9
to select the
Lights
Lights
submenu.
X
Press
a
to confirm.
X
Press
:
or
9
to select the
Dipped
Dipped
beams Setting for
beams Setting for
function.
You will see the selected setting,
right-
right-
side traffic
side traffic
or
left-side traffic
left-side traffic
.
X
Press the
a
button to save the setting.
If you change the setting, conversion does not
take place until the next time the vehicle is
stationary.
If you set the dipped-beam headlamps for driv-
ing on the right/left, then motorway mode and
the extended range foglamps are unavailable.
These are only deactivated if the setting for driv-
ing on the left/right is set opposite to your vehi-
cle's country version.
A qualified specialist workshop can set the
dipped-beam headlamps for driving on the left/
right.
Instrument cluster submenu
Selecting the unit of measurement for dis-
tance
The
Display
Display unit
unit Speed-/odometer
Speed-/odometer
function
allows you to choose whether certain displays
appear in kilometres or miles in the multifunc-
tion display.
X
Press
ò
on the steering wheel to open the
menu list.
X
Press the
:
or
9
button on the steering
wheel to select the
Settings
Settings
menu.
X
Confirm by pressing
a
on the steering
wheel.
X
Use
:
or
9
to select the
Instrument
Instrument
cluster
cluster
submenu.
X
Press
a
to confirm.
X
Press
:
or
9
to select the
Display
Display
unit Speed-/odometer
unit Speed-/odometer
function.
The current setting
km
km
or
Miles
Miles
appears.
X
Press the
a
button to change the setting.
The selected unit of measurement for distance
applies to the:
R
digital speedometer in the
Trip
Trip
menu
R
total distance recorder and the trip meter
R
trip computer
R
current consumption and the range
R
range
R
navigation instructions in the
Navi
Navi
menu
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
United Kingdom: this function is unavailable.
The additional speedometer is always switched
on.
If the additional speedometer is switched on,
the speed is shown in the status bar of the mul-
tifunction display instead of the outside tem-
perature.
The speed display is inverse to your speedome-
ter.
X
Press
ò
on the steering wheel to open the
menu list.
X
Press
:
or
9
on the steering wheel to
select the
Settings
Settings
menu.
X
Confirm by pressing
a
on the steering
wheel.
X
Press
:
or
9
to select the
Instru‐
Instru‐
ment cluster
ment cluster
submenu.
X
Press
a
to confirm.
X
Using
:
or
9
, select the
Digital
Digital
speedo [km/h]
speedo [km/h]
function.
The current selection appears.
X
To activate/deactivate: press
a
again.
236
Menus and submenus
On-board
computer
and
displays
Содержание GLC Coupe 2016
