Mercedes-Benz G 550 2020, Руководство оператора

Страница: 412 / 530

#
Position jack 4 on the comfort bushing on
transverse link 5 .
#
Raise the vehicle by pumping until the tire is
no more than 1.2 in (3 cm) off the ground.
#
Loosen and remove the wheel (
/
page 410).
Raising the vehicle at the rear
#
Pull out the adapter from the jack.
#
Position jack 4 at the jack support point of
axle carrier tube 6 .
#
Keep pumping until axle carrier tube 6 sits
securely in the recess of the jack and the
base of the jack lies evenly on the ground.
#
Raise the vehicle by pumping until the tire is
no more than 1.2 in (3 cm) off the ground.
#
Loosen and remove the wheel (
/
page 410).
Removing a wheel
Requirements:
R
The vehicle is raised (
/
page 408).
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on
a dirty surface.
#
Unscrew the wheel bolts.
#
Remove the wheel.
#
Install the new wheel (
/
page 410).
Mounting a new wheel
Requirements:
R
The wheel is removed (
/
page 410).
&
WARNING Risk of accident from losing a
wheel
Oiled, greased or damaged wheel bolt/wheel
nut threads or wheel hub/wheel mounting
bolt threads can cause the wheel bolts/
wheel nuts to come loose.
As a result, you could lose a wheel while driv‐
ing.
#
Never oil or grease the threads.
#
In the event of damage to the threads,
contact a qualified specialist workshop
immediately.
#
Have the damaged wheel bolts or dam‐
aged hub threads replaced.
#
Do not continue driving.
410 Wheels and tires