Mercedes-Benz G 550 2020, Руководство оператора

Страница: 144 / 530

#
Press DYNAMIC SELECT switch 1 forwards
or backwards.
The selected drive program appears in the
multifunction display in the instrument clus‐
ter and in the multimedia system display.
Selecting the Desert drive program
%
The availability of the following function is
country-dependent.
#
Change to drive program E (Eco).
#
Press and hold DYNAMIC SELECT switch 1
backwards for approx. three seconds.
A visual and acoustic message is emitted.
#
Confirm the selection with the left touchpad
button on the steering wheel.
The Desert Drive Program Act. ESP Unavaila-
ble See Operator's Manual message appears
in the instrument cluster. The ESP ® and ABS
warning lamps light up.
%
Observe the notes on the Desert ESP
®
.
% A visual and acoustic message is emitted
again when the driver's door is opened while
the engine is running to draw attention to
restricted road suitability in case of a change
of drivers.
#
Press DYNAMIC SELECT switch 1 forwards
to deactivate the Desert drive program.
% The drive program C (Comfort) is automati‐
cally active after starting the vehicle.
Configuring drive program I
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
5
Individual
#
Select the individual setting.
Switching the operation feedback for drive
program on/off
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Switch Notification for User on O or off ª .
When this function is active, a corresponding
message is shown in the media display when
a drive program is selected with the
DYNAMIC SELECT switch.
Displaying vehicle data
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Select Vehicle Data .
The following information is displayed:
R
Compass
R
Wheel angle
R
Incline
R
Gradient
R
Altitude
R
LOW RANGE (
/
page 149)
R
Locking (
/
page 150)
Displaying engine data
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Select Engine Data .
% The values for engine output and engine tor‐
que may deviate from the nominal values.
142 Driving and parking