Configuring the charging settings
Multimedia system:
4
©
5
EQ
5
Charging options
Setting the charging program
You can watch an animation on this topic via the
following link:
#
Select
Home
,
Work
or
Standard
.
Unlocking the charging cable (mode 3 or 4)
When the function is active, the charging cable is
unlocked when the maximum charge level is
reached.
#
Select
Home
or
Work
.
#
Activate or deactivate
Unlock charging cable
.
Activating or deactivating location-based charging
#
Select
Charge at home
or
Charge at work
.
#
Activate or deactivate
Select based on loca-
tion
.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over
as soon as parking position P is engaged.
Activating or deactivating ECO charging
#
Activate or deactivate the function.
The
ECO charging
function limits the charging
voltage at charging stations to conserve the vehi-
cle's battery.
Setting the departure time
The set departure times are used for the vehicle's
pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. The charging process
always starts immediately, irrespective of the next
departure time.
#
Select
Departure time
.
The following charging times can be selected:
R
individual charging times
R
one
Week profile
Setting an individual departure time
#
Select
Add new time
and set a new departure
time.
or
#
Select
´
and adapt an existing departure
time.
Setting the repeat days
#
Select
Add new time
and set a new departure
time.
#
Mark the relevant weekdays for which the
departure time will apply and confirm with
a
.
or
#
Select
´
and edit existing repeat days.
Setting a break in the charging process
Up to four breaks in the charging process can be
set during which the vehicle is not charged, even
if it is connected to a charging station.
#
Select
Charging interruptions
.
#
Select
Add new time
and then set and save
the times for the beginning and end of the
break.
#
Activate or deactivate the charging breaks that
have been set.
304 Driving and parking
ohne
Содержание EQS 2021
