Mercedes-Benz EQS 2021, Руководство оператора

Страница: 296 / 928

Combo 1 vehicle socket Combo 2 vehicle socket
#
Open socket flap 1 via the EQ module of the
multimedia system (
/
page 442).
or
#
Press the centre rear section of socket flap
1
.
Socket flap
1
swings open and status display
2 lights up white.
Vehicles with an electric socket flap: if an obsta-
cle impedes the electric socket flap while it is
opening, the socket flap closes again automati-
cally and the driver's display shows a correspond-
ing display message.
%
When the vehicle is started (the õ display
is lit in the driver's display), socket flap 1
cannot be opened.
%
Only upper connection 3 is required for the
charging cable connector.
#
To charge at a mains socket, insert the mains
plug into the mains socket of the external
power source as far as it will go.
#
Insert the charging cable connector into vehi-
cle socket connection 3 to the stop. If the
wallbox/charging station is not equipped with
a charging cable, insert the plug of the vehi-
cle's charging cable into the wallbox/charging
station socket to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display
2 flashes orange and, as soon
as the high-voltage battery is charged, blue.
294 Driving and parking
ohne