Mercedes-Benz E-Class Wagon, Руководство оператора

Страница: 53 / 510

child restraint system which secures
the child with the vehicle seat belt.
#
Also secure the child restraint system
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
R
in the manufacturer's installation and operat‐
ing instructions for the child restraint system
used
R
on a label on the child restraint system, if
present
Regularly check that the permissible gross mass
of the child and child restraint system is still
being adhered to.
When using a child restraint system, be sure to
observe the manufacturer's installation and
operating instructions as well as its correct use
and the suitability of the seats for attaching a
child restraint system.
Before every trip, make sure that the LATCH-type
(ISOFIX) child restraint system is engaged cor‐
rectly in both LATCH-type (ISOFIX) mounting
brackets.
1
LATCH-type (ISOFIX) mounting brackets
* NOTE Damage to the seat belt for the
center seat
When installing a child restraint system, the
seat belt for the center seat could be dam‐
aged.
#
Make sure that the seat belt is not trap‐
ped.
#
Remove each cover for LATCH-type (ISOFIX)
mounting brackets 1 .
#
Attach the LATCH-type (ISOFIX) child
restraint system to both LATCH-type (ISOFIX)
mounting brackets 1 .
#
After removing the child seat, replace each
cover for LATCH-type (ISOFIX) mounting
brackets 1 .
Securing Top Tether
&
WARNING Risk of injury or death if the
rear seat backrests are not locked after
installing Top Tether belts
If the rear seat backrests are not locked, they
could fold forwards in the event of an acci‐
dent or during braking or sudden changes of
direction.
As a result, child restraint systems cannot
perform their intended protective function.
Occupant safety 51