Mercedes-Benz E-Class Wagon, Руководство оператора

Страница: 392 / 510

Setting up the folding wheel chock
Preparing the vehicle for a wheel change
Requirements
R
The required tire-change tool kit is available.
If your vehicle is not equipped with the tire-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with automatic transmission:
shift into position j .
#
Vehicles with AIR BODY CONTROL: set the
normal vehicle level (
→
page 190).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Remove the hub caps if necessary
(
→
page 390).
#
Raising the vehicle (
→
page 391).
Removing and installing hub caps
Requirement:
R
The vehicle is prepared for a wheel change
(
→
page 390).
Plastic hub cap
#
To remove: turn the center cover of the hub
cap anti-clockwise and remove the hub cap.
#
To install: make sure that the center cover of
the hub cap is turned anti-clockwise.
#
Position the hub cap and turn the center
cover clockwise until the hub cap engages
physically and audibly.
390 Wheels and tires